Used vinyl · For sale on Vinted IT / EN
Vinyl care

How to clean used vinyl records without damaging them

A record found at a flea market almost always has dust, fingerprints and residue in the grooves. It’s worth cleaning it before you play it, but it has to be done the right way: here is the method, step by step.

By the Soul Records team22 November 20263 min readLeggi in italiano →
Fig. 1 · [Photo: a record on the turntable, before cleaning]

Why clean a used record

Dust and dirt in the groove create noise and wear out both the record and the stylus faster. A lot of crackle and hiss doesn’t actually come from the record itself, but from dirt that can be removed.

Cleaning a record won’t erase real scratches, but it shows you what the record is really like: only after cleaning can you tell whether a flaw is permanent or not.

What you need to clean vinyl records

  • ·Two clean microfibre cloths, washed without fabric softener.
  • ·An anti-static carbon fibre brush.
  • ·Distilled water: tap water leaves limescale residue.
  • ·A dedicated record cleaning fluid, optional but recommended for stubborn dirt.
  • ·A dish rack or record stand to let the record dry upright.
  • ·New inner sleeves, paper or anti-static polyethylene.

Start with dry cleaning

Place the record on a clean, soft surface, such as a folded cloth. Run the brush along the grooves without pressing, to remove surface dust. If the record has just come out of its sleeve and there’s little dirt, sometimes this is enough.

Always clean along the grooves, never across them.

How to wash a record by hand

If there are fingerprints, smudges or stubborn dirt, you need a wet clean. The process is simple, but don’t rush it.

  • ·Lay the record on a clean surface and protect the centre label: it must not get wet.
  • ·Dampen a microfibre cloth with distilled water and, if you like, a few drops of record cleaning fluid.
  • ·Wipe along the grooves, from the edge towards the label, with light pressure.
  • ·Go over it with a second cloth dampened only with distilled water, to remove any cleaning fluid.
  • ·Dry it with a dry cloth and leave the record upright until it is completely dry.

For large collections or records in poor shape there are also record cleaning machines, vacuum or ultrasonic. They work well but are expensive: for a few dozen records, washing by hand is enough.

Glass cleaner, alcohol and other mistakes to avoid

The most common question is whether household products can be used. The answer is almost always no: glass cleaners and solvents can dull the surface and leave residue in the groove. Some record cleaning fluids contain a small amount of diluted isopropyl alcohol, but pure alcohol should be avoided.

  • ·Hot water or tap water.
  • ·Glass cleaners, pure alcohol and harsh solvents.
  • ·Sticky tape or glue to “pull” dirt off.
  • ·Kitchen paper and wiping across the grooves.
Careful with 78s

78 rpm records are made of shellac, not vinyl: water and alcohol can damage them. Only dry-clean these.

After cleaning: sleeves and storage

Replace the inner sleeve with a new one, paper or anti-static polyethylene, and store the record upright, away from sunlight and heat. Over time, a horizontal stack warps records.

If the record still hisses or skips after cleaning, the problem is in the vinyl itself: deep scratches, warping or mould can’t be fixed by washing.

All our records
are on Vinted.

View profile ↗